This unique device allows you to choose between two audio modes : Standard Left/Right for individual track processing or Mid/Side to control stereo image, ideal for mastering operation.
. 2 Audio Modes Left/Right and Mid/Side
. 2 Tubes per Channel (Preamp & Drive)
. Tube Preamp BIAS Adjustment
. Gain/Volume Adjustment for Harmonic Distortion
. Trim Adjustment
. Treble & Bass EQ Ajustment
. Selectable High-Pass Filter
. Individual Channel Phase Switch
. Output Level Monitoring on VU-meters
Vacuum tube sound
The KERWAX Replica uses two vacuum tubes per channel: one for pre-amplification and equalization, and one for the Volume/Gain stage. We selected the 12AX7 tubes for their optimal results with a wide variety of audio sources. However, if you want to experiment and obtain different results, the tubes are replaceable. You can use all references from the 12AX7 family.
Create your own touch
Now, you can build your distinctive sound, and stand out in the digital crowd. You can easily warm-up and add distorsion to any input audio signal: use Trim and Bias settings to adjust depth of sound and produce harmonics, and select Drive function with Gain setting to add progressive saturation to the sound. Thanks to its gentle Baxendall curves, the integrated treble and bass EQs are very musical and smooth. In case you need to remove some harmful low frequencies, a High-Pass filter allows you to choose between 80 Hz and 120 Hz frequencies. The possibilities are endless: experiment and enjoy!